Other materiales - A07 | STASTO Automation România

Other materiales - A07

Store

Category

Guide

Oil- and gas-proof cover; Body Bronze; Without TÜV-inspection number; Fixed and sealed

Relief valve Series RV27

Female thread; Body Brass; Seal FKM

Axial type check valve Series 227

Body Ductile iron EN-GJS-400-15; Seals EPDM; Flange PN16; Max. Inlet pressure 16bar; Medium temperature -10…65°C

Flange pressure regulator Series PR17

Body Ductile iron EN-GJS-400-15; Seals NBR/EPDM; Flange PN25; Max. Inlet pressure 25bar; Operating pressure range 1,5...8bar; Medium temperature -10...70°C

Flange pressure regulator Series PR07

Other materiales - A07

Body Nickel plated brass; Seals NBR/FKM; Max. Inlet pressure 10bar; Medium temperature +4…+60°C

Pressure regulator fixed set Series PR30

Flanged type; Disc EPDM rubberized; Seal EPDM; Medium temperature 0...80°C; Nominal flange pressure PN10

Swing check valve Series CH036

Flanged type; Reset by lever and weight; Body And Disc Ductile iron EN-GJS-400-15; Seal Bronze Free of zinc; Medium temperature Max. 60°C; Nominal flange pressure PN10

Swing check valve Series CH049

Flanged type; Body And Disc Ductile iron EN-GJS-400-15; Seal Bronze Free of zinc; Medium temperature Max. 60°C; Nominal flange pressure PN10

Swing check valve Series CH050

Flanged type; Body 1.4408; Strainer screen 1.4401; Nominal pressure PN40; Medium temperature -60...300°C

Strainer

Body Brass; Strainer screen 1.4301; Cover sealing FKM; Medium temperature -10...180°C

Strainer Series ST002

Flanged type; Nominal pressure PN10; Body Ductile iron EN-GJS-500-7; Ball Steel/NBR; Medium temperature -10...70°C

Ball check valve Series CH051

Flanged type; Body Cast iron EN-GJL-250; Seal Metallic; Medium temperature 0...300°C; Nominal flange pressure PN16

Check valve Series CH032

Flanged type; Body and disc stainless steel; Seat seal PTFE; Inconel X-750 spring; Medium temperature -29...150°C; Nominal flange pressure PN40

Rückschlagventil Serie CH084

Wafer type; Body 1.4408; Disc 1.4404; Seal FKM; Medium temperature -20...200°C

Check valve Series CH009-V

Wafer type; Body 1.4408; Disc 1.4404; Seal NBR; Medium temperature -25...95°C

Check valve Series CH009-N

Flanged type; Nominal pressure PN16; Body Ductile iron EN-GJS-500-7; Ball Steel/NBR; Medium temperature -10...70°C

Ball check valve Series CH053

Flanged type; Reset by its own weight; Body Cast iron EN-GJL-250; Seal Metallic; Medium temperature 0...200°C; Nominal flange pressure 16; Flap material 1.4027

Swing check valve Series CH030

With twist lifting; Body Bronze; Seal NBR; Application: Water, Neutral liquids; Medium temperature -30...130°C

Safety valve Series SV04

Wafer type; PN10; Reset by spring; Body, Disc Polypropylen; Seal FKM

Swing check valve Series CH056

Wafer type; PN10; Reset by spring; Body, Disc Polypropylen; Seal EPDM

Swing check valve Series CH056-E

With twist lifting; Body Stainless steel AISI 316Ti; Compression spring Stainless steel AISI 301; Application: Compressed air, Non-toxic and non-inflammable gases, which are allowed to flow freely

Safety valve Series SV25

ATEX zone 0 and 20; Body 1.4571; Cap 1.4581; Gas-proof cover

Safety valve Series SV06

Body 1.4571; Cap Ductile iron EN-GJS-400-18-LT, From set pressure 200bar 1.4581; Gas-proof cover

Safety valve Series SV05

With twist lifting; Body Bronze; Seal PTFE; Application for liquids, gaseous media and steam; Medium temperature -60...225°C

Safety valve, full stroke Series SF12

With twist lifting; With bronze-bellow; Body Bronze; Seal EPDM; Application: Toxic, flammable liquids; Medium temperature -40...170°C

Safety valve, full stroke Series SF06

Body Bronze; Application for liquids, gaseous media and steam; Medium temperature -60...+225°C

Safety valve, full stroke Series SF11

Body 1.4408; Seals FKM; Medium temperature -10...120°C; Maximum inlet pressure 60bar

Pressure regulator Series PR53

Without relieving; Medium Nitrogen; Flow at 6bar

Low pressure regulator Series PR56

With twist lifting; Body Bronze; Seal NBR; Application: Neutral liquids; Medium temperature -30...130°C

Safety valve, full stroke Series SF05

Wafer type; Body 1.4408; Disc 1.4404; Seal PTFE; Medium temperature -10...200°C

Check valve Series CH009-T

With twist lifting; Body Brass; Compression spring Stainless steel; Application Compressed air, Non-toxic and non-inflammable gases, which are allowed to flow freely

Safety valve Series SV01

Material 1.4401; Seal PTFE; Medium temperature -20...200°C; Pressure range 0,025...16bar; Length 55mm

Axial type check valve Series CH004-T

With twist lifting; With metal bellow Stainless steel AISI 316Ti; Body Stainless steel AISI 316L

Safety valve Series SV12

Body, Inner parts 1.4305; Seal FKM; Manual adjusting of discharge pressure (Lock nut); Medium temperature 0...180°C; Without TÜV-inspection number

Relief valve Series RV04

Material 1.4401; Seal PTFE; Medium temperature -20...200°C

Axial type check valve Series CH014

With twist lifting; Body Brass; Compression spring Stainless steel; Application: Compressed air, Non-toxic and non-inflammable gases, which are allowed to flow freely; Medium temperature -20...200°C

Safety valve Series SV02

Body, Inner parts 1.4401; Seal PTFE; Pressure range 0,1...16bar; Medium temperature -30...130°C

Axial type check valve Series CH006

Wafer type; Body Zinc plated steel; Disc 1.4404; Seal FKM; Medium temperature -10...200°C; Nominal flange pressure PN10/25, ANSI150

Check valve Series CH055

Wafer type; Body Zinc plated steel; Disc 1.4404; Metal sealing; Medium temperature -10...270°C; Nominal flange pressure PN10/25, ANSI150

Check valve Series CH055

Wafer type; Reset by its own weight; Body Zinc plated steel; Seal NBR; Medium temperature -10...95°C

Swing check valve Series CH034

With twist lifting; Body Stainless steel AISI 316L; Cap Stainless steel AISI 316; Application: Compressed air, Non-toxic gases, vapors

Safety valve Series SV32

Body 1.4571; Cap 1.4301; Application: Compressed air, Non-toxic and non-inflammable gases, which are allowed to flow freely

Safety valve Series SV13

ATEX zone 0 and 20; Body Stainless steel AISI 316Ti; Cap Brass; Application: Compressed air, Non-toxic and non-inflammable gases, which are allowed to flow freely

Safety valve Series SV14

For vapors, gases and liquids

Safety valve Series SV09

For vapors, gases and liquids; Body Stainless steel AISI 316Ti; Spring cover And Outlet body Stainless steel AISI 316Ti

Safety valve Series SV10

Temperature range -10…60°C

Relief valve Series RV23

Incl. manometer; Temperature range -10…60°C

Relief valve Series RV23

Body, Inner parts 1.4571; Seal FKM

Axial type check valve Series CH031

With twist lifting; Body 1.4571; Cap Brass; Application: Compressed air, Non-toxic and non-inflammable gases, which are allowed to flow freely; Incl. Deflector ring

Safety valve Series SV07

Body And Cap Brass

Vacuum relief valve Series RV24

Body 1.4571; Cap Ductile iron EN-GJS-400-15; Gas-proof cover

Safety valve, full stroke Series SF07

Without relieving; Body Brass; Seals Vespel/FKM; Max. Inlet pressure 414bar; Medium temperature -5…+75°C

High pressure regulator Series PR45

Oil- and gas-proof cover; Body Bronze; Without TÜV-inspection number

Relief valve Series RV05

Pressure regulator Series PR09

Wafer type; Reset by spring; Body Zinc plated steel; Seal NBR; Medium temperature -10...120°C

Swing check valve Series CH012-PN64

With twist lifting; With bellows; Body Stainless steel 1.4571/1.4408;Application: Compressed air, Gases, Vapors

Safety valve, full stroke Series SF14

Body Bronze; Fine screen Stainless steel; Spring cover, Seals FKM; Max. Inlet pressure 40bar; Operating pressure range 5...15bar; Medium temperature -10…95°C

Pressure regulator Series PR03-V

Body 1.4408; Valve seat 1.4401; Metal sealing

Check valve Series CH045

Gas-proof cover; With lifting lever; Body Ductile iron; Application: Compressed air, gases, vapors

Safety valve Series SV46

Wafer type; Reset by spring; Body, Disc 1.4401;

Swing check valve Series CM-6666

Wafer type; Reset by spring; Body Zinc plated steel

Swing check valve Series CM-2466/CM-2424

Wafer type; Reset by spring; Body Zinc plated steel; Seal EPDM; Medium temperature -10...130°C

Swing check valve Series CM-2466E/CM-2424E

Wafer type; Reset by spring; Body Zinc plated steel; Seal PTFE; Medium temperature -10...250°C

Swing check valve Series CM-2466T/CM-2424T

Wafer type; Reset by its own weight; Body Zinc plated steel

Swing check valve Series CS-2466/CS-2424

Wafer type; Reset by its own weight; Body Zinc plated steel; Seal EPDM; Medium temperature -10…130°C

Swing check valve Series CS-2466E/CS-2424E

Wafer type; Reset by its own weight; Body, Disc 1.4401

Swing check valve Series CS-6666

Body Bronze; Flange PN16; Fine screen Stainless steel; Seals FKM; Max. Inlet pressure 16bar

Flange pressure regulator Series PR04

Wafer type; Body 1.4404; Disc 1.4404

Dual plate check valve Series CH019

Body Bronze; Seal EPDM; Application: Hot water, Heating And Cooling; Medium temperature -10...120°C

Safety valve Series SV37

Body Bronze; Gas-proof cover; Without lifting; Application: Liquids

Safety valve, full stroke Series SF02

Body Bronze; Gas-proof cover; Without lifting; Application: Compressed air, Flammable and toxic gases and steam, Liquids

Safety valve, full stroke Series SF13

Gas-proof cover; With lifting lever; Body Ductile iron; Application: Liquids, Compressed air, gases, vapors

Safety valve Series SV52

Oil- and gas-proof cover; Body 1.4404/1.4408; Without TÜV-inspection number

Relief valve Series RV12

Body Bronze; Flange PN40; Fine screen Stainless steel; Seals FKM; Medium temperature -10...120°C

Flange pressure regulator Series PR04

Body Bronze; Gas-proof cover; Without lifting; Application: Flammable and toxic gases and steam

Safety valve, full stroke Series SF03

Flange PN40; Body 1.4408; Strainer screen 1.4401; Pressure range 0…40bar; Medium temperature -60...300°C

Strainer Series ST007

Flange PN16; Body 1.4408; Strainer screen 1.4401; Medium temperature -60...300°C

Strainer Series ST054

Body 1.4404; Compression spring Stainless steel; Seal Metallic/Polyamide; Application: Compressed air, Gases; Medium temperature -60…180°C

Safety valve Series SV51

Body 1.4408; Strainer screen 1.4401

Strainer Series ST057

For cryogenic applications; Inlet body 1.4404; Outlet body 1.4408; Seal PTFE; Temperature range -200...+200°C; Gas-proof cover; Application: Air; Vapors; Gases And Liquids; Free of oil and grease

Safety valve Series SV30

Body 1.4408; Strainer screen 1.4401; Nominal pressure 0...100bar; ANSI Class 800

Strainer Series ST058

Wafer type; Body 1.4408; Disc 1.4404; Metal sealing; Medium temperature -10...270°C; PN63/100/160, ANSI600/900

Check valve Series CH062

With twist lifting; Body Bronze; Seal NBR; Application: Compressed air, Non-toxic gases, vapors; Medium temperature -30...130°C

Safety valve, full stroke Series SF01

Material 1.4404/1.4408; Gas-proof cover; Without lifting; Application: For vapors, gases and liquids

Safety valve Series SV31

With twist lifting; Body Bronze; Seal PTFE; Application: Compressed air, Non-toxic gases, vapors; Medium temperature -60…+225°C

Safety valve, full stroke Series SF01

Suitable for Pressure regulator Series PR03...0.5/2

Valve insert

Body 1.4408; Seals EPDM; Medium temperature -20...120°C

Pressure regulator Series PR08-E

Body 1.4408; Seals EPDM; Maximum inlet pressure 40bar; Operating pressure range 5...15bar; Medium temperature -10...95°C

Pressure regulator Series PR08...5/15-E

Body 1.4408; Flange PN40; Fine screen Stainless steel; Seals EPDM; Medium temperature -20...120°C

Flange pressure regulator Series PR12-E

Pressure regulator Series PR15

Body 1.4408; Seals FKM

Relief valve Series RV43

Wafer type; Body 1.4408; Disc 1.4404; Metal sealing; Medium temperature -10...270°C; PN10/16/25/ANSI150

Check valve Series CH063

With twist lifting; Body Bronze; Seal PTFE; Application: Neutral liquids; Medium temperature -60...225°C

Safety valve, full stroke Series SF05-T

ATEX zone 0 and 20; Body 1.4571; Cap Ductile iron EN-GJS-400-15, From set pressure 200bar 1.4581; Gas-proof cover; Incl. TÜV-Inspection certificate EN-10204-3.2

Safety valve Series SV05-3G

Body 1.4571; Cap Ductile iron EN-GJS-400-15, From set pressure 200bar 1.4581; Gas-proof cover; Incl. Inspection certificate EN10204-3.1; For pressure, function and tightness

Safety valve Series SV05-3C

Oil- and gas-proof cover; Body 1.4408; Without TÜV-inspection number

Relief valve Series RV17

ATEX zone 0 and 20; Body 1.4571; Cap 1.4581; Gas-proof cover; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve Series SV06-3C

Oil- and gas-proof cover; Body 1.4408; Without TÜV-inspection number

Relief valve Series RV17-9A(9B)

With twist lifting; Body Bronze; Seal FKM; Application: Neutral liquids; Medium temperature -20...200°C

Safety valve, full stroke Series SF05

Body 1.4571

Vacuum relief valve Series RV44

With twist lifting; Body Bronze; Seal PTFE; Application: Compressed air, Non-toxic gases, vapors; Medium temperature -60...225°C; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve, full stroke Series SF01

Body 1.4408; Seals EPDM; Medium temperature -10...95°C

Overflow valve Series RV26

With twist lifting; Body Brass; Compression spring Stainless steel; Application Compressed air, Non-toxic and non-inflammable gases, which are allowed to flow freely; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve Series SV01-3C

Body Bronze; Fine screen Stainless steel; Seals EPDM; Maximum inlet pressure 40bar; Operating pressure range 1...8bar; Medium temperature -20...120°C

Pressure regulator Series PR03…1/8

With twist lifting; Body Bronze; Seal FKM; Application: Neutral liquids; Medium temperature -20...200°C; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve, full stroke Series SF05

Spring loaded; Body Brass; Seal NBR; Pressure range 0,5…10bar; Medium temperature Max. 80°C

Angle seat check valve Series CH061

With twist lifting; Body Brass; Compression spring Stainless steel; Application: Compressed air, Non-toxic and non-inflammable gases, which are allowed to flow freely; Medium temperature -20...200°C; Incl. TÜV-Inspection certificate EN-10204-3.2

Safety valve Series SV02-3G

Body Bronze; Gas-proof cover; Without lifting; Application: Compressed air, gases, vapors; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve, full stroke Series SF03-3C

Water; Filter element 90ym; Plastic bowl; Inlet pressure Max. 16Bar;

Micro filter Series 100.6

Wafer type; Reset by its own weight; Body, Disc 1.4401; Seal FKM; Medium temperature Max. 200°C

Swing check valve Series CH044

Wafer type; Reset by spring; Body, Disc 1.4401; Seal FKM; Medium temperature Max. 200°C

Swing check valve Series CH064

Wafer type; Body Zinc plated steel; Disc 1.4404; Metal sealing; Medium temperature -10...270°C; PN63/100/160, ANSI600/900

Check valve Series CH065

Wafer type; Reset by its own weight; Body Zinc plated steel; Seal NBR; Medium temperature -10...120°C; Nominal flange pressure ANSI150

Swing check valve Series CH010-ANSI150

Wafer type; Reset by its own weight; Body Zinc plated steel; Seal NBR; Medium temperature -10...120°C; Nominal flange pressure ANSI150; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Swing check valve Series CH010-ANSI150-3C

Body 1.4408; Seals EPDM; Medium temperature -20...120°C; Incl. Inspection certificate EN-10204-3.1 For material

Pressure regulator Series PR08-E-3D

Wafer type; Body 1.4408; Disc 1.4404; Seal EPDM; Medium temperature -35...130°C

Check valve Series CH009-E

Body 1.4581; Cap 1.4571; Gas-proof cover; Without TÜV-inspection number

Relief valve Series RV13

Body; Cap Brass; Gas-proof cover; Without TÜV-inspection number

Relief valve Series RV14

Body Stainless steel 1.4571/1.4408; Application: Compressed air, Non-toxic gases, vapors; Medium temperature -60...225°C; Gas-proof cover

Safety valve Series SV34

With twist lifting; Body Bronze; Seal EPDM; Application: Water, Neutral liquids; Medium temperature -50...150°C

Safety valve Series SV04-E

Flanged type; Body Cast steel; Strainer screen 1.4301; Flange ANSI150

Strainer

Flanged type; Body 1.4408; Strainer screen 1.4401; Nominal pressure PN16; Medium temperature -60...300°C; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Strainer

Wafer type; Reset by its own weight; Body, Disc 1.4401; Seal EPDM; Medium temperature -10…+130°C

Swing check valve Series CH044

With twist lifting; Body Bronze; Seal FKM; Application: Compressed air, Non-toxic gases, vapors; Medium temperature -20...200°C

Safety valve Series SV03-V

With twist lifting; Body Bronze; Seal NBR; Application: Water, Neutral liquids; Medium temperature -30...130°C; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve Series SV04-3C

With twist lifting; Body Stainless steel AISI 316Ti; Compression spring Stainless steel AISI 301; Application: Compressed air, Non-toxic and non-inflammable gases, which are allowed to flow freely; Incl. TÜV-Inspection certificate EN-10204-3.2

Safety valve Series SV25-3G

Oil- and gas-proof cover; Body 1.4408; Without TÜV-inspection number

Relief valve Series RV17

Oil- and gas-proof cover; Body 1.4408; Without TÜV-inspection number

Relief valve Series RV17

With twist lifting; With bronze-bellow; Body Bronze; Application: Toxic, flammable gases;

Safety valve, full stroke Series SF04

Wafer type; Reset by its own weight; Body Zinc plated steel; Seal NBR; Flange ANSI600; Medium temperature -10…+120°C

Swing check valve Series CS-2466/CS-2424-ANSI600

Safety valve Series SV25

Body Stainless steel AISI 316L; Cap Stainless steel AISI 316; Gas-proof cover; Medium temperature -60…+225°C

Safety valve Series SV49

Flange PN16; Body EN-GJL-250; Strainer screen 1.4301; Pressure range 0…16bar; Medium temperature -10…+300°C

Strainer Series ST005

Flange PN40; Body; Cast steel GP240GH+N; Strainer screen 1.4301; Pressure range 0…40bar; Medium temperature; -10…+400°C

Strainer Series ST073

Suitable for Pressure regulator Series PR04...1/8-V

Valve insert

With twist lifting; Body Bronze; Seal EPDM; Application: Compressed air, Non-toxic gases, vapors; Medium temperature -50...150°C

Safety valve Series SV03-E

Safety valve Series SV01-3G

Flange ANSI150; Body Cast steel; Strainer screen 1.4301

Strainer Series ST069

Body 1.4571; Cap Ductile iron EN-GJS-400-15; Gas-proof cover; Without TÜV-inspection number

Relief valve Series RV06

Body 1.4571; Cap Ductile iron EN-GJS-400-15; Gas-proof cover; Without TÜV-inspection number; Incl. Inspection certificate EN10204-3.1; For pressure, function and tightness

Relief valve Series RV06-3C

Safety valve Series SV02-3C

Body 1.4581; Cap 1.4581; Gas-proof cover; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve Series SV10

Safety valve Series SV25

For vapors, gases and liquids; Body steel ASTM A105; Spring cover And Outlet body EN-GJS-400-18-LT; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness

Safety valve Series SV09

With twist lifting; With metal bellow Stainless steel AISI 316Ti; Body Stainless steel AISI 316L; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness

Safety valve Series SV12

With twist lifting; Body 1.4404; Compression spring 1.4310; Application: Compressed air, Non-toxic and non-inflammable gases, which are allowed to flow freely; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Safety valve Series SV11-3E

With twist lifting; Body Bronze; Seal NBR; Application: Water, Neutral liquids; Medium temperature -30...130°C; Incl. TÜV-Inspection certificate EN-10204-3.2

Safety valve Series SV04-3G

ATEX zone 0 and 20; Body 1.4571; Cap 1.4581; Gas-proof cover; Incl. TÜV-Inspection certificate EN-10204-3.2 For pressure, function and tightness

Safety valve Series SV06-3G

Free of oil and grease; With twist lifting; Body Brass; Compression spring Stainless steel; Medium Oxygen; Medium temperature Max. 60°C; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve Series SV01-3C-3C-0

Body 1.4571; Cap 1.4581; Gas-proof cover; Incl. TÜV-Inspection certificate EN-10204-3.2

Safety valve Series SV10

With twist lifting; Body 1.4404; Compression spring 1.4310; Application: Compressed air, Non-toxic and non-inflammable gases, which are allowed to flow freely; Incl. TÜV-Inspection certificate EN-10204-3.2

Safety valve Series SV11-3G

Body 1.4408; Incl. sealed spring chamber

Overflow valve Series RV28

Body 1.4408

Overflow valve Series RV28

Body Bronze; Fine screen Stainless steel; Spring cover, Seals FKM; Max. Inlet pressure 40bar; Operating pressure range 0,5...2bar; Medium temperature -10…+120°C

Pressure regulator Series PR03-V

Oil- and gas-proof cover; Body Bronze; Without TÜV-inspection number

Relief valve Series RV02

Body Brass; Fine screen Stainless steel; Spring cover, Polyamide; Seals NBR/EPDM; Mesh size 0,4mm; Max. Inlet pressure 16bar; Operating pressure range 1,5...6bar; Medium temperature -10…+70°C

Pressure regulator Series PR65

Body 1.4571; Cap Ductile iron EN-GJS-400-15, From set pressure 200bar 1.4581; Gas-proof cover; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness

Safety valve Series SV05-3E

Free of oil and grease; Oil- and gas-proof cover; Body Bronze; Seal PTFE-TFM 1600; Without TÜV-inspection number; Medium Oxygen; Medium temperature Max. 60°C

Relief valve Series RV27-TFM

Free of oil and grease; With twist lifting; Body Bronze; Seal PTFE-TFM 1600; Medium Oxygen; Medium temperature Max. 60°C

Safety valve Series SV03-TFM

Body 1.4571; Cap 1.4581; Gas-proof cover; Without TÜV-inspection number

Relief valve Series RV07 Set pressure

With bellows; Back pressure tight up to 4bar; Body Bronze; Without TÜV-inspection number

Relief valve Series RV21

With twist lifting; With bronze-bellow; Body Bronze; Seal FKM; Application: Toxic, flammable liquids; Medium temperature -20...200°C

Safety valve, full stroke Series SF06-V

With twist lifting; With bronze-bellow; Body Bronze; Seal PTFE; Application: Toxic, flammable liquids; Medium temperature -60...225°C

Safety valve, full stroke Series SF06-T

With twist lifting; With bronze-bellow; Body Bronze; Seal PTFE coal filled; Application: Toxic, flammable liquids; Medium temperature -60...225°C

Safety valve, full stroke Series SF06-C

With twist lifting; With bronze-bellow; Body Bronze; Application: Toxic, flammable gases; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve, full stroke Series SF04-3C

With twist lifting; With bronze-bellow; Body Bronze; Application: Toxic, flammable gases;Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Safety valve, full stroke Series SF04-3E

Body Bronze; Inner parts Brass; Seals NBR; Operating pressure range 1,5...10bar; Medium temperature -10...95°C

Pressure regulator Series PR14

Body POM Food safe; Inner parts Stainless steel AISI 316; Seals EPDM/NBR Food safe; Max. Inlet pressure 16bar; Medium temperature +5...23°C

Pressure regulator Series PR22

For liquids; Body Bronze; With bellows; Lifting lever; Incl. TÜV-Inspection certificate EN-10204-3.2

Safety valve Series SV20

For gases; Body Bronze; With bellows; Lifting lever

Safety valve Series SV20

For liquids; Body Bronze; With bellows; Lifting lever; Incl. TÜV-Inspection certificate EN-10204-3.2

Safety valve Series SV20

For liquids; Body Bronze; With bellows; Lifting lever; Incl. TÜV-Inspection certificate EN-10204-3.2

Safety valve Series SV20

Wafer type; Body, Disc, Seal PTFE; Spring Hastelloy C4; Medium temperature -10…+180°C; Nominal flange pressure PN10/16; Max. Operating pressure 6bar

Check valve Series CH021

Incl. Inspection certificate EN-10204-3.1 For material (Inlet body)

Pressure regulator Series PR15-3D

Body 1.4408; Fine screen Stainless steel; Seals EPDM; Medium temperature -20...120°C; Seals With FDA-Approval; Diaphragm With Drinking water certification

Flange pressure regulator Series PR12-E

With twist lifting; Body Bronze; Seal NBR; Application: Compressed air, Non-toxic gases, vapors; Medium temperature -30…130°C; Incl. Inspection certificate EN-10204-3.1 For material, pressure, function and tightness

Safety valve Series SV03-3E

Suitable for Strainer Series ST054; Material 1.4401

Spare-screen

With twist lifting; Body Bronze; Seal NBR; Application: Water, Neutral liquids; Medium temperature -30...130°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Safety valve Series SV04-3E

For vapors, gases and liquids; Body Stainless steel AISI 316Ti; Spring cover And Outlet body Stainless steel AISI 316Ti; With gas-proof cover

Relief valve Series RV16

Suitable for Strainer Series ST007; Material 1.4401

Spare-screen

With twist lifting; Body Bronze; Seal NBR; Application: Compressed air, Non-toxic gases, vapors; Medium temperature -30…130°C

Safety valve Series SV03

For cryogenic applications; Inlet body 1.4404; Outlet body 1.4408; Seal PTFE; Temperature range -200...+200°C; Gas-proof cover; With lifting lever; Application: Air; Vapors; Gases And Liquids; Free of oil and grease; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Safety valve Series SV68-3E

Safety valve Series SV03-3C

Wafer type; Body 1.4408; Disc 1.4404; Metal sealing; Medium temperature -55…+250°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Check valve Series CH009-3C

Flanged type; Material EN-GJS-500-7; With counter weight; Metal sealing; Medium temperature -10…+90°C; Incl. WRAS-certificate for drinking water

Check valve Series CH028

For vapors, gases and liquids

Safety valve Series SV19

For vapors, gases and liquids; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve Series SV19

Body 1.4571; Cap 1.4581; Gas-proof cover; Without TÜV-inspection number; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness (Material: Inlet body)

Relief valve Series RV07-3E

Suitable for Strainer Series ST005; Material 1.4301

Spare-screen

Body 1.4571; Cap 1.4581; Gas-proof cover With lifting lever; Incl. TÜV-Inspection certificate EN-10204-3.2 For pressure, function and tightness

Safety valve Series SV06

Wafer type; Reset by its own weight; Body steel A350-LF2; Disc 1.4401; Seal NBR; Medium temperature -20...120°C

Swing check valve Series CH075

Wafer type; Reset by its own weight; Body steel A350-LF2; Disc 1.4404; Seal FKM; Medium temperature -46…250°C

Swing check valve Series CH075-V

Wafer type; Reset by its own weight; Body steel A350-LF2; Disc 1.4401; Seal NBR; Medium temperature -20…120°C; Nominal flange pressure PN64

Swing check valve Series CH075-PN64

Wafer type; Reset by its own weight; Body steel A350-LF2; Disc 1.4401; Seal NBR; Medium temperature -20…120°C; Nominal flange pressure PN64; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Swing check valve Series CH075-PN64-3C

Wafer type; Reset by its own weight; Body Zinc plated steel; Seal NBR; Medium temperature -10...120°C; Nominal flange pressure ANSI600

Swing check valve Series CH010-ANSI600

Wafer type; Reset by its own weight; Body steel A350-LF2; Disc 1.4401; Seal NBR; Medium temperature -20…120°C; Incl. Inspection certificate EN10204-3.1; For material, pressure, function and tightness

Swing check valve Series CH075-3C

Wafer type; Reset by spring; Body steel A350-LF2; Disc 1.4401; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Swing check valve Series CH026-3C

Wafer type; Reset by its own weight; Body Zinc plated steel; Seal NBR; Medium temperature -10…120°C

Swing check valve Series CH010

Wafer type; Reset by its own weight; Body Zinc plated steel; Seal NBR; Medium temperature -10...+120°C

Swing check valve Series CH010-PN64

Without relieving; Body Brass; Seals Vespel/FKM; Max. Inlet pressure 414bar; Medium temperature -5…+75°C; With pressure gauge; Incl. Inspection certificate EN-10204-3.1; For material

High pressure regulator Series PR45

With twist lifting; Body Bronze; Seal NBR; Application: Compressed air, Non-toxic gases, vapors; Medium temperature -30…130°C

Relief valve Series SV03

With twist lifting; Body Bronze; Seal EPDM; Application: Compressed air, Non-toxic gases, vapors; Medium temperature -50…150°C

Relief valve Series SV03

ATEX zone 0 and 20; Body 1.4571; Cap Ductile iron EN-GJS-400-15, From set pressure 200bar 1.4581; With lifting lever; Incl. TÜV-Inspection certificate EN-10204-3.2 For pressure, function and tightness

Safety valve Series SV05-3G

Body 1.4571; Cap Ductile iron EN-GJS-400-15; With lifting lever; Incl. TÜV-Inspection certificate EN-10204-3.2 For pressure, function and tightness

Safety valve, full stroke Series SF07-3G

Body 1.4571; Cap 1.4581; Gas-proof cover; Free of oil and grease for oxygen; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Safety valve Series SV06-3E

With twist lifting; Body Brass; Compression spring Stainless steel; Application: Compressed air, Non-toxic and non-inflammable gases, which are allowed to flow freely; Incl. EAC-Certificate; With valve pass And Laser marking

Safety valve Series SV01-EC

Wafer type; Reset by its own weight; Body steel A350-LF2; Disc 1.4404; Seal FKM; Medium temperature -46…250°C; Incl. Inspection certificate EN10204-3.1; For material, pressure, function and tightness

Swing check valve Series CH075-V-3C

Wafer type; Reset by spring; Body, Disc 1.4404; Seal FKM; Medium temperature -50…+260°C; Incl. Inspection certificate EN10204-3.1 For material, pressure, function and tightness

Swing check valve Series CH013-3C

Wafer type; Reset by spring; Body, Disc 1.4404; Seal PTFE; Medium temperature -50…+260°C; Incl. Inspection certificate EN10204-3.1 For material, pressure, function and tightness

Swing check valve Series CH013-T-3C

Reset by its own weight; Body, Disc Brass; Seal NBR; Medium temperature 0…+90°C

Swing check valve Series CH087

With twist lifting; Body Bronze; Seal NBR; Application: Compressed air, Non-toxic gases, vapors; Incl. TÜV-Inspection certificate EN-10204-3.2

Safety valve Series SV03-3G

Wafer type; Reset by spring; Body steel A350-LF2; Disc 1.4401; Seal FKM; Medium temperature -46…250°C

Swing check valve Series CH026-V

Body Bronze Lead-free; Fine screen Stainless steel; Spring cover Fibre-glass-reinforced polyamide; Screen cup Polyamide; Seals EPDM; Mesh size 0,16mm; Max. Inlet pressure 16bar; Outlet pressure 0,5…12bar; Medium temperature 5…+40°C

Pressure regulator Series PR94

With twist lifting; Body Bronze; Seal NBR; Application: Water, Neutral liquids; Medium temperature -30...130°C; Incl. Test report EN-10204-2.2

Safety valve Series SV04-2A

With twist lifting; Body Bronze; Seal NBR; Application: Compressed air, Non-toxic gases, vapors; Medium temperature -30...130°C; Incl. Test report EN-10204-2.2

Safety valve, full stroke Series SF01-2A

With lifting lever; With bronze-bellow; Body Bronze; Seal PTFE; Medium temperature -60…225°C; Connections Loose flange; Incl. Inspection certificate EN-10204-3.1 For pressure, function and tightness; Material test certificate EN-10204-3.1 For materials; Incl. Notch impact test; ATEX-certificate According to Directive 2014/34/EU; Area 1/21

Safety valve Series SF04-4E

With twist lifting; With bronze-bellow; Body Bronze; Application: Toxic, flammable gases; Incl. Inspection certificate EN-10204-3.1 For pressure, function and tightness; ATEX zone 1 and 21

Safety valve, full stroke Series SF04

Gas-proof cover; With lifting lever; Body Ductile iron; Application: Liquids, Compressed air, gases, vapors; incl. inspection certificate EN10204-2.2

Safety valve Series SV52-2A

Gas-proof cover; With lifting lever; Body Ductile iron; Application: Liquids, Compressed air, gases, vapors; Incl. Inspection certificate EN-10204-3.1 For pressure, function and tightness

Safety valve Series SV52-3C

Gas-proof cover; With lifting lever; Body Ductile iron; Application: Liquids, Compressed air, gases, vapors; Incl. Inspection certificate EN-10204-3.1 for pressure, function, tightness and material

Safety valve Series SV52-3E

Gas-proof cover; With lifting lever; Body Ductile iron; Application: Liquids, Compressed air, gases, vapors; Incl. Inspection certificate EN-10204-3.2

Safety valve Series SV52-3G

Without relieving

Low pressure regulator Series PR88

Body Brass; Seals PTFE/Metallic; Medium temperature -60...+225°C

Vacuum relief valve Series RV37

Oil- and gas-proof cover; Body 1.4408; Without TÜV-inspection number; Incl. ATEX-certificate According to Directive 2014/34/EU; ATEX zone 1 and 21

Relief valve Series RV17-ATEX

With twist lifting; With bronze-bellow; Body Bronze; Application: Toxic, flammable gases;; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness; ATEX zone 1 and 21

Safety valve, full stroke Series SF04

Wafer type; Reset by its own weight; Body, Disc 1.4401; Seal FKM; Medium temperature -50…+260°C

Swing check valve Series CH011

For vapors, gases and liquids; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve Series SV09

Body Bronze; Fine screen Stainless steel; Seals EPDM; ATEX zone 1 and 21

Pressure regulator Series PR03-ATEX

Body Bronze; Fine screen Stainless steel; Seals EPDM; ATEX zone 1 and 21; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Pressure regulator Series PR03-3C-ATEX

Wafer type; Reset by spring; Body, Disc 1.4401; Seal FKM; Medium temperature -50…+260°C

Swing check valve Series CH013

Flange PN16; Body EN-GJL-250; Strainer screen 1.4301; Pressure range 0…16bar; Medium temperature -10…+300°C; Incl. Inspection document According to DIN EN 12266 And Inspection certificate EN-10204-3.1

Strainer Series ST005-4A

Body Bronze; Flange PN40; Fine screen Stainless steel; Seals FKM; Maximum inlet pressure 40bar; Operating pressure range 5...15bar; Medium temperature -10…+95°C

Flange pressure regulator Series PR04-PN40

Body 1.4571; Cap 1.4581; Gas-proof cover With lifting lever; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness; Inspection certificate EN-10204-2.2; For Inlet body And Cone Country of origin EU

Safety valve Series SV06-4J0

Safety valve Series SV25-ATEX

Body Bronze

Overflow valve Series RV22

Spring loaded; Body 1.4408; Inner parts 1.4571/1.4310; Seal PTFE; Medium temperature -20…+200°C; Weld ends according to DIN 11850; Incl. Certificate according to EN 10204-2.2

Angle seat check valve Series CH040-2C

Body 1.4408; Strainer screen 1.4301; Mesh size 0,25mm; Pressure range 0…40bar; Medium temperature -40…+220°C; Butt weld ends according to DIN 11850; Incl. Certificate according to EN 10204-2.2

Strainer Series ST079-2C

Wafer type; Reset by spring; Body, Disc 1.4401; Seal EPDM; Medium temperature -40…+130°C; Incl. Inspection certificate EN10204-3.1 For material, pressure, function and tightness

Swing check valve Series CH013-E-3C

Wafer type; Reset by spring; Body, Disc 1.4401; Seal PTFE; Medium temperature -50…+260°C

Swing check valve Series CH013-T

Wafer type; Reset by its own weight; Body, Disc 1.4401; Seal FKM; Medium temperature -50…+260°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Swing check valve Series CH011

For vapors, gases and liquids; Body 1.0619; Spring cover 1.0254; With gas-proof cover; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Relief valve Series RV19-3C

Body 1.4408; Fine screen Stainless steel; Seals EPDM; Medium temperature -20...120°C; ATEX zone 1 and 21; Incl. Inspection certificate EN-10204-3.1 For material

Flange pressure regulator Series PR12-E-A-3D

With twist lifting; Body Brass; Compression spring Stainless steel; Application: Compressed air, Non-toxic and non-inflammable gases, which are allowed to flow freely; Incl. Test report EN-10204-2.2

Safety valve Series SV01-2A

Wafer type; Reset by its own weight; Body, Disc 1.4401; Seal EPDM; Medium temperature -40…+130°C

Swing check valve Series CH011-E

Wafer type; Body 1.4408; Disc 1.4404; Seal EPDM; Medium temperature -35...130°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Check valve Series CH009-E-3C

Body 1.4436; Seals PTFE-NBR/FKM; Medium temperature 0...80°C; Non-relieving

Precision pressure regulator Series PR60

Incl. ATEX-declaration; Body 1.4571; Cap Ductile iron EN-GJS-400-15; Gas-proof cover; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve, full stroke Series SF07

Material 1.4404/1.4408; Gas-proof cover; With twist lifting; Application: Liquidsr; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve Series SV27

With twist lifting; Body 1.4404; Compression spring 1.4310; Application: Compressed air, Non-toxic and non-inflammable gases, which are allowed to flow freely

Safety valve Series SV11

Suitable for Strainer Series 306, ST005

Cover sealing

Suitable for Strainer Series 385, ST007

Cover sealing

With twist lifting; Body Bronze Application: Compressed air, Non-toxic gases, vapors; Medium temperature -30...130°C; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve, full stroke Series SF01

With twist lifting; Body Bronze; Seal EPDM; Application: Compressed air, Non-toxic gases, vapors; Medium temperature -50…150°C; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve Series SV03-E-3C

Oil- and gas-proof cover; Body 1.4408; Without TÜV-inspection number; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Relief valve Series RV17-3C

Body 1.4408; Strainer screen 1.4301; Pressure range 0…40bar; Medium temperature -40…+220°C

Strainer Series ST004

Wafer type; Body 1.4401; Disc 1.4401; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness

Check valve Series CH090-3C

Free of oil and grease; With twist lifting; Body Brass; Compression spring Stainless steel; Medium Oxygen; Medium temperature Max. 60°C; Incl. TÜV-Inspection certificate EN-10204-3.2

Safety valve Series SV01-3C-3G-0

With twist lifting; With bellows; Body Stainless steel 1.4571/1.4408;Application: Liquids; Gases

Safety valve Series SV33

With twist lifting; Body Bronze; Application: Compressed air, gases, vapors, Liquids

Safety valve, full stroke Series SF19

With twist lifting; Body Bronze; Application: Compressed air, gases, vapors, Liquids; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve, full stroke Series SF19

ATEX zone 1 and 21; Body 1.4408; Seals FKM; Medium temperature -10…+120°C

Pressure regulator Series PR08

Body 1.4571; Cap 1.4581; Lifting lever; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness; TÜV-Inspection certificate EN-10204-3.2 For pressure, function and tightness; Inspection certificate EN-10204-3.1; For material (Inlet body); Inspection certificate EN-10204-3.1; For material (Cone)

Safety valve Series SV06

Body 1.4571; Cap 1.4581; Gas-proof cover; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness; TÜV-Inspection certificate EN-10204-3.2 For pressure, function and tightness; Inspection certificate EN-10204-3.1; For material (Inlet body); Inspection certificate EN-10204-3.1; For material (Cone)

Safety valve Series SV06

Body Bronze; Flange PN40; Fine screen Stainless steel; Seals EPDM; Maximum inlet pressure 40bar; Operating pressure range 5...15bar; Medium temperature -20…+95°C

Flange pressure regulator Series PR04-PN40

Body 1.4571; Cap 1.4581; Lifting lever; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve Series SV06

Body 1.4408; Fine screen Stainless steel; Incl. Inspection certificate EN-10204-3.1 For material

Flange pressure regulator Series PR12-3D

Seal FKM; Medium temperature -20…+150°C

Axial type check valve Series CH004

Wafer type; Reset by spring; Body Zinc plated steel; Seal NBR; Medium temperature -10...120°C, Nominal flange pressure ANSI150

Swing check valve Series CH012-ANSI150

Body 1.4571; Cap Ductile iron EN-GJS-400-15; Gas-proof cover; Without TÜV-inspection number; Incl. Inspection certificate EN-10204-3.1; For material (Inlet body)

Relief valve Series RV06-3D

Drinking water certification WRAS; Flanged type; Body EN-GJS-500-7 Epoxy coated 250µm; Seal EPDM; Medium temperature -10…+90°C

Check valve Series CH092

With twist lifting; Body Stainless steel/Bronze; Seal PTFE; Application: Compressed air, Non-toxic gases, vapors; Medium temperature -60…225°C; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve Series SV80

With twist lifting; With bronze-bellow; Body Bronze; Seal PTFE coal filled; Application: Toxic, flammable liquids; Medium temperature -60...225°C

Safety valve, full stroke Series SF06

Body 1.4408; Seals FKM; Medium temperature -10...95°C

Overflow valve Series RV26

Body Brass

Vacuum relief valve Series RV36

Body Brass; Seals PTFE/Metallic; Medium temperature -60...+225°C

Vacuum relief valve Series RV37

Safety valve Series SV25-3G-ATEX

With lifting lever; With metal bellow Stainless steel AISI 316Ti; Body Stainless steel AISI 316L; Incl. TÜV-Inspection certificate EN-10204-3.2; Certificate ASME Boiler and Pressure Vessel Code, Section VIII.Div 1 (ASME) For gaseous media; Inspection certificate EN-10204-3.1; For material; ATEX-certificate; EAC-Certificate; With valve pass And Laser marking

Safety valve Series SV59

Safety valve Series SV60

For cryogenic applications; Gas-proof cover; With lifting lever; Inlet body 1.4404; Outlet body 1.4408; Seal PTFE; Application: Air; Vapors; Gases And Liquids; Medium temperature -200...+200°C; Free of oil and grease; Incl. TÜV-Inspection certificate EN-10204-3.2; Certificate ASME Boiler and Pressure Vessel Code, Section VIII.Div 1 (ASME) For gaseous media; Inspection certificate EN-10204-3.1; For material; ATEX-certificate; EAC-Certificate; With valve pass And Laser marking

Safety valve Series SV68-4T0

Safety valve, full stroke; Body 1.4571; Cap 1.4581; Gas-proof cover; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Safety valve, full stroke Series SF08

Body 1.4571; Cap 1.4581; Gas-proof WithLifting lever; Without TÜV-inspection number; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Relief valve Series RV16-3C0

With twist lifting; With bronze-bellow; Body Bronze; Seal EPDM; Application: Toxic, flammable liquids; Medium temperature -40...170°C; Incl. TÜV-Inspection certificate EN-10204-3.2 For pressure, function and tightness

Safety valve, full stroke Series SF06

Body 1.4408; Seal PTFE; Medium temperature 0...180°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Check valve Flanged type

Wafer type; Body Zinc plated steel; Disc 1.4404

Dual plate check valve Series CH020

Length According to EN558−1R48; Flanged type; Body EN-GJS-500-7; Disc EPDM rubberized; Medium temperature -10…+90°C; Incl. WRAS-certificate for drinking water

Check valve Series CH098

Safety valve Series SV01-3E

ATEX zone 0 and 20; Body Stainless steel AISI 316Ti; Cap Brass; Application: Compressed air, Non-toxic and non-inflammable gases, which are allowed to flow freely; Incl. TÜV-Inspection certificate EN-10204-3.2

Safety valve Series SV14-3G

Safety valve, full stroke; Body 1.4571; Cap 1.4581; Gas-proof cover; Incl. Inspection certificate EN10204-3.1; For pressure, function and tightness

Safety valve, full stroke Series SF08-3C

Oil- and gas-proof cover; Body 1.4408; Without TÜV-inspection number; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Relief valve Series RV17-3E

Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Pressure regulator Series PR15-3C

Body 1.4571; Cap 1.4581; Gas-proof With Handwheel; Without TÜV-inspection number; Incl. TÜV-Inspection certificate EN-10204-3.2

Relief valve Series RV16-3G

Oil- and gas-proof cover; Body 1.4408; Without TÜV-inspection number

Relief valve Series RV17-N

Wafer type; Body 1.4408; Disc 1.4404; Metal sealing; Medium temperature -10…+270°C

Check valve Series CH058

Check valve Series CH058; Wafer type; Body 1.4408; Disc 1.4404; Metal sealing; Medium temperature -10…+270°C

Check valve Series CH058 Opening pressure

Strainer screen 1.4301; Mesh size 0,6mm; Pressure range 0…25bar; Medium temperature -10…+150°C

Strainer Series ST003-0,6

With twist lifting; Body Bronze; Seal NBR; Application: Water, Neutral liquids; Medium temperature -30...130°C; Incl. Inspection certificate EN-10204-3.1; For material

Safety valve Series SV04-3D

; Flanged type; Body 1.4408; Seal Metallic; Medium temperature -10...400°C; Nominal flange pressure PN40; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Check valve Series CH070-3C

Free of oil and grease; Gas-proof cover; Body 1.4404; Compression spring Stainless steel; Seal; Medium temperature -40…60°C; Incl. TÜV-Inspection certificate EN-10204-3.2

Safety valve Series SV53-3G

Wafer type; Body 1.4408; Disc 1.4404; Metal sealing; Medium temperature -28…+270°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness; Incl. notch impact test

Check valve Series CH058-3E

Wafer type; Body 1.4408; Disc 1.4404; Seal PTFE; Medium temperature -28…+200°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness; Incl. notch impact test

Check valve Series CH058-3E

Wafer type; Body 1.4408; Disc 1.4404; Seal PTFE; Medium temperature -28…+200°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure and tightness; Incl. notch impact test

Check valve Series CH058-3E

Body Aluminum; Seals FKM/PTFE-NBR; Maximum inlet pressure 10bar; Medium temperature -20...+80°C

Low pressure regulator Series PR113

Body Stainless steel And Aluminum; Seals FKM/PTFE-NBR; Maximum inlet pressure 10bar; Medium temperature -20...+80°C

Low pressure regulator Series PR113-SP

Body 1.4571; Cap Ductile iron EN-GJS-400-15; Gas-proof cover; Without TÜV-inspection number

Relief valve Series RV06-Range of adjustment

Body steel ASTM A105/1.0619; Spring cover And Outlet body Ductile iron EN-GJS-400-15/1.0619; Gas-proof cover; Without TÜV-inspection number

Relief valve Series RV11

Wafer type; Reset by its own weight; Body steel A350-LF2; Disc 1.4401; Seal FKM; Medium temperature -46...+250°C; Incl. Inspection certificate EN10204-3.1; For material, pressure, function and tightness

Swing check valve Series CH075-V-PN63-3C

Free of oil and grease; ATEX According to Directive 2014/34/EU; Gas-proof cover; Body 1.4404; Compression spring Stainless steel; Seal; Medium temperature -40…180°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Safety valve Series SV53-3E

ATEX zone 0 and 20; Free of oil and grease; Body 1.4571; Cap 1.4581; Gas-proof cover; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness; Inspection certificate EN-10204-3.1; For material (Inlet body)

Safety valve Series SV06

Body 1.4408; Seals FKM; Medium temperature -10…+120°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Pressure regulator Series PR08-3E

Safety valve Series SV11-3C

Swing check valve Series CH010-3C

Body 1.4401; Strainer screen 1.4401; Medium temperature -10…+400°C

Strainer Series ST065

Female thread Body 1.4408; Seals FKM; Medium temperature -10…+120°C

Pressure regulator Series PR112

For vapors, gases and liquids; Inspection certificate EN-10204-2.2; For Function, Inlet body And Cone Country of origin EU

Safety valve Series SV19

Free of oil and grease; With twist lifting; Body Bronze; Seal NBR; Application: Compressed air, Non-toxic gases, vapors; Medium temperature -30…130°C

Safety valve Series SV03-0

Free of oil and grease; With twist lifting; Body Brass; Compression spring Stainless steel; Medium Oxygen; Medium temperature Max. 60°C

Safety valve Series SV01

Body Bronze; Fine screen Stainless steel; Spring cover; Seals FKM; Medium temperature -10…+120°C; Incl. Inspection certificate EN-10204-3.1 For material

Pressure regulator Series PR03-V-3D

Free of oil and grease; With twist lifting; Body Brass; Compression spring Stainless steel; Medium Oxygen;Medium temperature Max. 60°C; Incl. TÜV-Inspection certificate EN-10204-3.2 And Certificate 2.2

Safety valve Series SV01-3C-3I-0

Safety valve Series SV25-5D0

With twist lifting; Body Bronze; Seal NBR; Application: Neutral liquids; Medium temperature -30...130°C; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

Safety valve, full stroke Series SF05

Flange PN25; Body Ductile iron; Strainer screen 1.4301; Pressure range 0…25bar; Medium temperature -10...350°C

Strainer Series ST006

Flange PN16; Body Ductile iron; Strainer screen 1.4301; Pressure range 0…16bar; Medium temperature -10...350°C

Strainer Series ST008

With twist lifting; With bronze-bellow; Body Bronze; Seal PTFE; Application for liquids, gaseous media and steam; Medium temperature -60...225°C; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness

Safety valve, full stroke Series SF12-T-3E

Body Ductile iron EN-GJS-400-15; Seals EPDM; Flange PN16 Respectively PN25; Max. Inlet pressure 16bar Respectively 25bar; Operating pressure range 0,5…12bar; Medium temperature 5…+65°C

Flange pressure regulator Series PR125

Body Brass; Strainer screen 1.4301

Strainer Series ST009

Body, Inner parts Stainless steel AISI 316Ti; Seal PTFE

Check valve Series CH027

Female thread

Loading...
DN

Loading...
Pressure range

Loading...
Set pressure

Loading...
Flange

Loading...
Male thread

Loading...
Inlet pressure

Loading...
Connection

Loading...
Outlet pressure

Loading...
Other seals

Loading...
Seat seal

Loading...
Outlet female

Loading...
Female thread 2

Loading...
Inlet male

Loading...
Operating pressure

Loading...
Keywords
- Verpackungsmaterial/EPR-Recycling

Reset

Other materiales - A07

SV10-15A-12,5-25-N

Safety valve; Body 1.4571; Cap 1.4581; Seals PTFE/FKM; Gas-proof cover; Medium temperature -20...200°C; In- and outlet Flange connection Acc. to ANSI 150; DN15; d0= 12,5 mm; Set pressure 25bar

SV10-15A-12,5-7-N

Safety valve; Body 1.4571; Cap 1.4581; Seals PTFE/FKM; Gas-proof cover; Medium temperature -20...200°C; In- and outlet Flange connection Acc. to ANSI 150 DN15; d0= 12,5 mm; Set pressure 7bar

SV10-20A-12,5-4-V

Safety valve; Body 1.4571; Cap 1.4581; Gas-proof cover; In- and outlet Flange connection Acc. to ANSI 150 DN20; d0= 12,5 mm; Set pressure 4 bar; Seat seal FKM; Other seals FKM

SV10-25-16-0,5-H-4G0

Safety valve; For vapors, gases and liquids; Body Stainless steel AISI 316Ti; Spring cover And Outlet body Stainless steel AISI 316Ti; Lifting lever; Inlet DN25/PN16; Outlet DN25/PN16; DN 16mm; Drain hole in the spring bonnet G 1/4"; Seat seal Metallic; Other seals EPDM; Set pressure 0,5bar; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness; Inspection certificate EN-10204-3.1; For material (Inlet body); Inspection certificate EN-10204-3.1; For material (Seat, Spring, Air outlet housing Respectively Spring cover); Mathematical proof for valve design; Inductive position indicator NO

SV10-25-16-3,9-F-4K0

Safety valve; For vapors, gases and liquids; Body Stainless steel AISI 316Ti; Spring cover And Outlet body Stainless steel AISI 316Ti; Inlet DN25/PN16; Outlet DN25/PN16; DN 16mm; Valve head A; Seat seal 1.4571; Other seals FKM; Set pressure 3,9bar; With bellows; Incl. Inspection certificate EN-10204-3.1; For material (Inlet body); Inspection certificate EN-10204-3.1; For material (Seat, Spring, Air outlet housing Respectively Spring cover); TÜV-Inspection certificate EN-10204-3.2; For pressure, function and tightness; TÜV-Inspection certificate EN-10204-3.2; For material At -29°C; Incl. Notch impact test; Mathematical proof for valve design; Special flanges According to DIN EN 1092-1 B1

SV10-25-16-4,7-F-4U

Safety valve; For vapors, gases and liquids; Body Stainless steel AISI 316Ti; Spring cover And Outlet body Stainless steel AISI 316Ti; Inlet DN25/PN16; Outlet DN25/PN16; DN 16mm; Valve head A; Seat seal 1.4571; Other seals FKM; Set pressure 4,7bar; With bellows; Spindle locking screw; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness; Inspection certificate EN-10204-3.1; For material (Inlet body); Inspection certificate EN-10204-3.1; For material (Seat, Spring, Air outlet housing Respectively Spring cover); TÜV-Inspection certificate EN-10204-3.2; For pressure, function and tightness; TÜV-Inspection certificate EN-10204-3.2; For material At -29°C; Incl. Notch impact test; Mathematical proof for valve design; Inspection certificate EN-10204-2.2; For Screws And Nuts; Inspection certificate API 527-3.1; For pressure, function and tightness

SV10-25-16-4,8-F-4K0

Safety valve; For vapors, gases and liquids; Body Stainless steel AISI 316Ti; Spring cover And Outlet body Stainless steel AISI 316Ti; Inlet DN25/PN16; Outlet DN25/PN16; DN 16mm; Valve head A; Seat seal 1.4571; Other seals FKM; Set pressure 4,8bar; With bellows; Incl. Inspection certificate EN-10204-3.1; For material (Inlet body); Inspection certificate EN-10204-3.1; For material (Seat, Spring, Air outlet housing Respectively Spring cover); TÜV-Inspection certificate EN-10204-3.2; For pressure, function and tightness; TÜV-Inspection certificate EN-10204-3.2; For material At -29°C; Incl. Notch impact test; Mathematical proof for valve design; Special flanges According to DIN EN 1092-1 B1

SV10-25-16-5,7-F-4K0

Safety valve; For vapors, gases and liquids; Body Stainless steel AISI 316Ti; Spring cover And Outlet body Stainless steel AISI 316Ti; Inlet DN25/PN16; Outlet DN25/PN16; DN 16mm; Valve head A; Seat seal 1.4571; Other seals FKM; Set pressure 5,7bar; With bellows; Incl. Inspection certificate EN-10204-3.1; For material (Inlet body); Inspection certificate EN-10204-3.1; For material (Seat, Spring, Air outlet housing Respectively Spring cover); TÜV-Inspection certificate EN-10204-3.2; For pressure, function and tightness; TÜV-Inspection certificate EN-10204-3.2; For material At -29°C; Incl. Notch impact test; Mathematical proof for valve design; Special flanges According to DIN EN 1092-1 B1

SV29-38-6-12-2C0

Safety valve; Body 1.4404; Seal FFKM; Lifting lever; With bellows; Inlet male G3/8"; Outlet female G3/8"; Medium temperature -10...260°C; DN 6mm; Set pressure 12bar

SV29-38-6-8-2C0

Safety valve; Body 1.4404; Seal FFKM; Lifting lever; Application: Vapors; Gases; Liquids; Inlet male G3/8"; Outlet female G3/8"; Medium temperature -10...260°C; DN 6mm; Set pressure 8bar

SV29-38N-10-1,5-V

Safety valve; Body 1.4404; Seal FKM; Gas-proof cover; Application: Vapors; Gases; Liquids; Inlet male G3/8" NPT; Outlet female G3/8"; Medium temperature -20...200°C; DN 10mm; Set pressure 1,5bar

SV31-12W-15,8-11-3C0

Safety valve; Body Stainless steel 1.4571/1.4408; Seal PTFE; Application: For vapors, gases and liquids; Medium temperature -60...225°C; Inlet G1/2"; Outlet G1"; DN15,8mm; Set pressure 11bar; ATEX zone 1 and 21; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

SV31-12W-15,8-16-0

SV31-12W-15,8-2-0

SV32-12-15,8-2-E-3D

Safety valve; With twist lifting; Body Stainless steel AISI 316L; Cap Stainless steel AISI 316; Seal EPDM; Application: Compressed air, Non-toxic gases, vapors; Inlet G 1/2"; Outlet G 1/2"; DN 15,8mm; Set pressure 2bar; Seal EPDM; Medium temperature -40…170°C; Inspection certificate EN-10204-3.1 For Material

SV33-114W-32-1,3-V-3G

Safety valve; With twist lifting; With bellows; Body Stainless steel 1.4571/1.4408; Application: Liquids, Gases; Inlet 1 1/4"; Outlet 2"; DN 32mm; Seal FKM; Medium temperature -20...+200°C; Set pressure 1,3bar; Incl. TÜV-Inspection certificate EN-10204-3.2

SV33-2025A-15,8-3-T-3C

Safety valve; With twist lifting; With bellows; Body Stainless steel 1.4571/1.4408; Seal PTFE; Application for liquids, gaseous media and steam; Medium temperature -60…225°C; Inlet DN20/ANSI150; Outlet DN25/ANSI150; Connections Loose flange; DN 15,8mm; Set pressure 3bar; Incl. Inspection certificate EN-10204-3.1; For pressure, function and tightness

SV33-34W-18-12-T-0

Safety valve; Body 1.4571/1.4408; Seal PTFE; With metal bellow; With twist lifting; Application: Liquids; Gases; Medium temperature -60...225°C; Inlet G3/4"; Outlet G11/4", DN18mm, Set pressure 12bar; ATEX zone 1 and 21

SV33-40W3-30,3-30-6B-3V

Safety valve; With twist lifting; With bellows; Body Stainless steel 1.4571/1.4408; Seal Metallic; Application for liquids, gaseous media and steam; Medium temperature -60…400°C; Inlet DN40/ANSI300; Outlet DN50/ANSI300; Connections Welded; DN 30,3mm; Set pressure 30bar; Inspection certificate EN-10204-3.1, For pressure, function and tightness, For material, For weld seam; Hydrostatic body test

SV33-40W3-32-27,5-6B-3V

Safety valve; With twist lifting; With bellows; Body Stainless steel 1.4571/1.4408; Seal Metallic; Application for liquids, gaseous media and steam; Medium temperature -60…400°C; Inlet DN40/ANSI300; Outlet DN50/ANSI300; Connections Welded; DN 32mm; Set pressure 27,5bar; Inspection certificate EN-10204-3.1, For pressure, function and tightness, For material, For weld seam; Hydrostatic body test

Search

Your Cart

Categories

Other materiales - A07

Other materiales - A07